Sabina® 200 Mobile Lift

Adjustable for most patient heights

The Sabina® 200 sit-to-stand mobile lift is especially designed for people who have difficulty in standing up on their own from a seated position. The Sabina 200 is intended for use with patients who are able to actively participate in the raising motion. When standing, they can be moved to a wheelchair or to a toilet; this gives them standing practice in connection with the transfer.


Adjustable height

Adjustable height setting for patients of different height.

Raising motion

Ergonomic and comfortable raising motion.


The base on Sabina 200 is adjusted electrically, with the hand control.

Technical Specifications

Maximum load: 350lbs
Material: Powder-painted steel
Total: 93lbs
Heaviest removable part: 50lbs
Standard front: 75mm (2.9") twin wheel
Standard rear: 75mm (2.9") twin wheel
Foot rest: Removable
Lower-leg support: Adjustable height and depth, removable
Turning diameter: 49.2"
Emergency lowering device: Electrical
Lifting interval: 31.3"
Lifting speed (without load): 0.9 inch/sec
Sound level: 42 dB(A)
Protection class: IPX4
Operating forces of controls
Buttons on hand control: 4 N
Button on display: 4 N
Electrical data: 24 V
Intermittent power: Int. Op 10/90, active operation max 2 min. Only 10 % of a given length of time may be active, yet no more than 2 min.
Batteries: 2 x 12 V, 2.9 Ah. valve-regulated lead-acid gel-type batteries. New batteries are provided by your Liko representative.
Battery charger: CH01. 100-240 VAC, 50-60 Hz, max. 500 mA.
Motor for base-width adjustment: 24 V, 5 A, permanent magnetic motor
Lift motor: 24 V, 9.2 A, permanent magnetic motor with mechanical safety mechanism
<<<<<<< HEAD ======= >>>>>>> Typeahead / paging etc <<<<<<< HEAD